User guide

The basics 17
Attention - indicates insulin delivery has stopped. This can mean that
the pump is in Suspend mode. It can also mean an alarm is active or
an alarm condition exists that needs immediate attention for insulin
delivery to resume. A solid circle appears at the top of the screen
and the pump will beep periodically until either the pump is taken
out of Suspend mode or the condition is cleared. The screen will
show text describing the condition that put the pump in Attention
mode. For example, if the reservoir is empty, “Empty Reservoir” will
appear on the screen.
When the pump is in Attention mode, it will beep/vibrate periodically to remind you of the
condition. The beep/vibrate frequency varies depending on the condition that put the pump in
Attention mode. Refer to the section “Alarm conditions” in chapter 9 for alarm conditions that will
trigger the Attention mode. See “Stopping your pump” in chapter 3 to learn about the Suspend
mode.
Menus
The MAIN MENU is the highest level menu. There are submenus, functions, status and programming
screens in the lower menu levels. The menus are described in the following paragraphs.
TIP - If a screen item is flashing (blinking), during programming, press
/
to change the
value.
MAIN MENU - Highest menu level in the menu system. When you press ACT from the HOME screen,
the MAIN MENU will appear.
BOLUS MENU - Contains the settings and function for bolus deliveries. The button allows direct
access to the MANUAL BOLUS or to the Bolus Wizard feature without having to navigate through the
menus. Refer to Chapter 3, “Basic programming” for the manual bolus information or to Chapter 5,
“Using the Bolus Wizard feature” for bolusing using the Bolus Wizard feature.
SUSPEND - Stops all current insulin deliveries (basal, bolus and fixed prime). Refer to section
“Stopping your pump” in chapter 3 for more information.
Attention Mode