User guide

16 Chapter 2
Operating modes
The screen lets you know when a special feature is active or if there is a condition that needs your
attention. The active features and pump status will determine the operating mode. The screens for
the three modes are shown below.
Normal - mode for standard pump operations for normal basal and
bolus delivery. No special features are active (i.e., basal patterns,
temp basal, etc.). No alarms or alerts exist.
Special - indicates a special feature is active or an alert condition(s)
exists. Special mode does not restrict any of the pump functions.
When the pump is in Special mode, an open circle appears at the
top of the screen and it will beep/vibrate periodically to remind
you of the condition. The conditions and features that will put the
pump in Special mode are:
WARNING: When the pump is in “Attention mode,” all insulin deliveries are stopped.
➠ Low Reservoir condition
➠ Low Battery condition
➠ Block feature is on
➠ Dual or Square Wave bolus
delivery
➠ Basal pattern A or B is active
➠ Sensor alerts
➠ Temporary basal delivery
Normal Mode
Special Mode