User guide

Introduction 5
How to use this guide
NOTE - This user guide shows sample screens only. Your pump screens may be slightly different.
For step-by-step instructions, refer to the appropriate sections in this guide. Refer to the Glossary
for definitions of terms and functions. The terms and symbols used in this guide are in the table
below.
Term / symbol Meaning
“Press” to push and release the button
“Hold” to push and keep pressure on the button
“Select”
to press / to highlight a screen item you want to select
“Exit the menus” press ESC until the HOME screen appears
Pump Buttons always bold and uppercase; for example, ESC, ACT
Screen and menu names always uppercase; for example, MAIN MENU, REWIND screen
Menu selections always bold; for example, 12-Hour Setup, On, Off
Flashing (blinking)
screen item
you can change the value for that item with the / buttons
NOTE and TIP additional helpful information
CAUTION
warns of a potential hazard which, if not avoided, may result in minor or
moderate injury to the equipment
WARNING
notifies you of a potential hazard which, if not avoided, could result in
death or serious injury. It may also describe potential serious adverse
reactions and safety hazards
“Go to the...screen.”
when a step instructs you to “Go to” a screen, the path to that screen is
shown. For example:
1. From the MAIN MENU, select
Utilities and press ACT.
2. In the UTILITIES MENU, select
Alarm and press ACT.
3. The ALARM MENU appears.
Go to the ALARM MENU.
Main > Utilities > Alarm