User guide

132 Chapter 9
Reset
The Reset alarm triggers when pump settings are cleared because of one of
these reasons:
➠ Pump settings were cleared (Clear Settings function) and settings have not been
reprogrammed.
➠ A download attempt from the PC is incomplete. (The download function is
applicable to the optional software feature. Refer to the software user guide for
more information.)
Weak Battery
The pump tests the voltage of each battery installed. If the battery voltage is
less than full strength, this alarm may occur. The pump will operate normally,
but the battery life will be shorter than expected.
Always make sure to install a NEW battery in the pump.
8:35A
RESET
Settings cleared
by user
Reprogram settings
ESC, ACT to clear
WEAK
BATTERY
11:17A
Shorter battery
life expected
ESC, ACT to clear