User guide

Troubleshooting 127
Low Battery alert
If you get this alert, DO NOT go to sleep without replacing the battery.
The backlight, Remote control and meter functions are disabled during a
Low Battery condition. If the alert type is set to “vibrate,” the pump will
change to the audio alert “beep-medium.” Clear (ESC, ACT) this alert
before you replace your battery.
Alarms
Your pump has a sophisticated network of safety checks and systems. If
the safety network detects anything unusual, your pump notifies you of conditions that require your
immediate attention. The backlight illuminates the pump screen and the alarm/alert message
displays on the screen.
NOTE - The STATUS screen shows any alarms and alerts that are active.
➠ Why are alarms important?
Your pump monitors activities and notifies you if there is an unusual
pump status or your attention is required. When an attention alarm is
active, INSULIN DELIVERY IS STOPPED and immediate operator
interaction is required.
If the vibrate mode is on, all alarms and alerts start as vibrations and
then change to beeps. For your safety, if there is no response after ten
(10) minutes, the beeps change to a siren. The siren continues every
minute until the alarm is cleared.
LOW
BATTERY
Replace battery now
Use 1 AAA
ESC, ACT to clear
10:09A
when a solid circle
appears, follow the
instructions on the screen.