User guide

Utilities 119
Clear settings
Take the following steps only if you want to clear your pump to factory default settings.
1 Go to the UTILITIES screen and select User Settings. Then, hold down and press ACT.
Main > Utilities > User Settings
2 The USER SETTINGS screen is displayed. Select Clear Settings and press
ACT.
3 A CONFIRM message displays, giving you the option of clearing your
pump settings or not. Select YES and press ACT to clear the settings.
(You can press ESC to cancel.)
4 You will see a RESET screen, and then the pump will go through
various screens while it restarts. After the pump clears all of your
settings, the screen will go to the TIME/DATE SETUP screen.
5 Reset the time and date as described in “Setting the time and date”
on page 21.
6 After you set the time and date, you must rewind your pump. Refer to
“Rewinding your pump” on page 45 for instructions. Remember, all your settings have been cleared
and you must either restore or reprogram all your settings.
WARNING: Do not clear your pump settings while it is connected to your body.
CAUTION: Do not clear your pump settings unless directed by your healthcare professional or a
Medtronic MiniMed representative. If you clear your pump settings, it will be necessary
to reprogram all your personal pump settings as directed by your healthcare
professional. Additionally, you will have to rewind your pump.
Selftest
Language
User Settings
ACT
UTILITIES MENU
USER SETTINGS
Save Settings
Clear Settings
ACT
Restore Settings
CONFIRM
Yes
ACT
No
Settings cleared
by user
Reprogram settings
ESC, ACT to clear
3:32A
RESET