User guide

Utilities 113
3 Exit the menus when your are done.
Block feature
Block restricts access to pump programming. The factory setting for this feature is off. Block is an
important safety feature if the pump user requires someone else to maintain complete control of
pump operation. When Block is on, the remote control is used to deliver a bolus and suspend/resume
the pump. Direct pump programming is limited to Suspend, Block, and Selftest. You can, however,
still view status-type screens (STATUS, BOLUS and PRIME HISTORY, BASAL REVIEW, DAILY TOTALS,
etc.). Discuss what uses and settings are best for you with your healthcare professional. (You can
order the remote control from Medtronic MiniMed.)
Turn Block on
NOTE - The vibrate alert-type is disabled when Block is on.
1 Go to the BLOCK OPTION screen.
Main > Utilities > Block
2 Select On and press ACT. The HOME screen will
appear with an open circle. The Block option is now
on and the pump is in Special mode. Exit the menus.
Add Delete Review
Select Add ID and press ACT. Select Delete ID and press ACT.
Select Review ID and press
ACT.
Enter each of the six ID numbers.
Press ACT after each.
After you set the last number of
the ID, the screen will return to
the REMOTE ID MENU.
Select the remote ID that you
want to delete and press ACT.
The selected ID is now deleted.
The programmed IDs will show
in the REVIEW REMOTE ID
screen.
ADD REMOTE ID
_ _ _ _ _ _
(flashing)
DELETE REMOTE ID
2 222222
3 - - - - - -
1 111111
REMOTE ID MENU
Delete ID
Add ID
Review ID
REVIEW REMOTE ID
1 - - - - - -
2 222222
3 - - - - - -
BLOCK OPTION
Off
ACT
On