User guide

84 Chapter 6
NOTE - If you have BG Reminder turned on, a screen displays allowing you to accept or modify
the length of time after this bolus before you are reminded to check your BG.
6 Press ACT to accept and deliver the bolus. The BOLUS DELIVERY screen
appears.The pump beeps or vibrates at the start and end of the bolus. Shortly
after bolus delivery begins, the screen defaults to the HOME screen. An open
circle will appear indicating that your pump is in Special mode. If you want to
see the progress of the delivery, press ESC to see the STATUS screen.
Easy bolus
The EASY BOLUS button allows a quick way to deliver a Normal bolus. You will pre-set the
settings for this feature in the EASY BOLUS OPTION screen in the BOLUS MENU. Your pump is sent from
the factory with the Easy Bolus feature set to on. If you do not want to use Easy Bolus, turn it off.
After you set up Easy Bolus, with each press, you can increase the Normal bolus amount by a
fixed amount, called a “step.” Before you can deliver an Easy Bolus, you must set the amount in the
EASY BOLUS ENTRY screen. This amount equals the number of units of insulin for each step. The
maximum number of steps can equal up to your maximum bolus limit.
NOTE - When using vibrate mode, EASY BOLUS is limited to 20 steps or maximum bolus,
whichever comes first.
Once you set your step amount, you can program your Easy Bolus. When you are in the HOME
screen, each time you press the Easy Bolus amount increases by one “step.” You will hear a beep
or feel a vibration for each step increase. Each beep is a different tone. This makes it easy for you to
count the beeps while you are programming your Easy Bolus.
Easy bolus setup
1 Go to the EASY BOLUS OPTION screen.
Main > Bolus > Easy Bolus
Select On/Set and press ACT. If you do not
want to use Easy Bolus, select
Off and press
ACT.
NOTE - If you are using the remote control, the Easy Bolus must be set to on.
ACT
BOLUS DELIVERY
3:24P
Square
0.
1U
Off
On/Set
EASY BOLUS OPTION