User guide

CGM
37
Refer to Chapters 8 & 9 in the MiniMed Paradigm™ Veo™ User Guide
Step 1
PLACE the sensor in the Sen-serter (the
black rings should no longer be visible).
GETTING CONTROL
Inserting the Sensor
Step 4
REMOVE the needle guard.
Step 6
PUSH on the white button for insertion.
Step 2
LOAD the Sen-serter by pressing the sensor
backwards into the Sen-serter until you hear
a CLICK.
Step 5
PLACE the Sen-serter onto taut skin.
Step 7
SLIDE the Sen-serter backward along the
skin, while keeping the sensor in place.
Step 8
REMOVE the introducer needle carefully,
keeping it at an angle. KEEP the sensor at
against the skin to prevent the sensor from
detaching.
Step 9
REMOVE the white adhesive protector,
keeping the sensor in place.
Step 3
REMOVE the transparent adhesive lm.