User guide

19
Infusion Set & Reservoir
Insertion of the Medtronic Quick-Set
Infusion Set
Step 4
REMOVE the needle protector
(blue cone) by unscrewing it.
Step 1
INSERT the Quick-Set into the
insertion device (Quick-Serter).
Step 2
REMOVE the protective lms
from the adhesive.
Step 3
LOAD the Quick-Serter by
pulling back on the plunger.
GETTING CONNECTED
Refer to Chapter 5 in the MiniMed Paradigm™ Veo™ User Guide
Please refer to PAGE 16 of this manual
BEFORE YOU START
(continued on next page)