User guide

18
GETTING CONNECTED
Fill the Infusion Set Tubing
Step 1
A C T
Step 2
A C T
Step 3
A C T
Step 4
A C T
Step 5
Insert the reservoir
(with set connected)
into the pump
compartment and lock
it (1/4 turn).
A C T
Step 6
A C T
Step 7
A C T
Step 9
A C T
Step 10
Insert set (see
instructions for inserting
infusion sets).
A C T
Step 11
Using the arrows,
ADJUST the volume
needed to ll the
cannula.*
A C T
Step 12
A C T
Refer to Chapter 5 in the MiniMed Paradigm™ Veo™ User Guide
Step 8
Fill until drops are
seen at the end of the
infusion set tubing.
, then
A C T
* Note: if using the Sure-T infusion set, filling the cannula is not
required. Press
to skip "Fill Cannula" (Step 10).