Operating instructions

LIFEPAK
®
CR–T AED TRAINER
Quick Start Reference Card
LIFEPAK
®
CR–T AED TRAINER
Quick Start Reference Card
Button Function Button Function
Press to change SHOCK ADVISED to NO SHOCK
ADVISED
. Function is active only during simulated
analysis.
Press once to activate the
ATTENTION
indicator in the readiness display. To clear,
press the button again.
Press to advance the training electrodes to ON or
OFF.
Press any time to suspend device
operation. Press again to resume operation
at point of interruption.
Press to advance
MOTION DETECTED to ON or OFF.
This feature is active during simulated analysis only.
Press to change the speaker volume. The
volume level scrolls up, and returns to
lowest level after the highest is reached.
Press to activate
WRENCH indicator on the readiness
display (active only when Trainer is in simulated OFF
status). To clear, press the button again.
Press to enter the GREEN SELECT button
operating settings.
Press to activate
CHARGE-PAK indicator on the
readiness display (active only when Trainer is in
simulated OFF status). To clear, press the button
again.
Press to enter the RED SELECT button
operating settings.
Press the
RIGHT ARROW button to advance
to the next operating setting.
Feature not available
Press the
UP ARROW button to select the
desired option.
Button Function Button Function
Press to change SHOCK ADVISED to NO SHOCK
ADVISED
. Function is active only during simulated
analysis.
Press once to activate the
ATTENTION
indicator in the readiness display. To clear,
press the button again.
Press to advance the training electrodes to ON or
OFF.
Press any time to suspend device
operation. Press again to resume operation
at point of interruption.
Press to advance
MOTION DETECTED to ON or OFF.
This feature is active during simulated analysis only.
Press to change the speaker volume. The
volume level scrolls up, and returns to
lowest level after the highest is reached.
Press to activate
WRENCH indicator on the readiness
display (active only when Trainer is in simulated OFF
status). To clear, press the button again.
Press to enter the GREEN SELECT button
operating settings.
Press to activate
CHARGE-PAK indicator on the
readiness display (active only when Trainer is in
simulated OFF status). To clear, press the button
again.
Press to enter the RED SELECT button
operating settings.
Press the
RIGHT ARROW button to advance
to the next operating setting.
Feature not available.
Press the
UP ARROW button to select the
desired option.