Operating instructions

LIFEPAK CR–T Trainer Operating Instructions 27

Caring for the LIFEPAK CR–T AED Trainer

ACCESSORIES

The following accessories are available for the LIFEPAK CR–T AED Trainer:

SPECIFICATIONS

Table 17 lists the specifications for the LIFEPAK CR–T AED Trainer. Table 18 lists the specifications for

the remote control.

Table 16 LIFEPAK CR–T AED Trainer Accessories

Accessory Part Number

QUIK-PAK Training Electrode Packet 3201805

Shock Button Cover 3201801

Remote Control and Cable 3201799

Serial Cable 3206630

CHARGE-PAK Trainer 3201800

Quick Reference Card 3201508

Soft Case 3201803

Soft Case Cards 3201792

International Lid Labels 3201755

Table 17 LIFEPAK CR–T AED Trainer Specifications

General Device designed for low impact, low stress environments. For use in

temperature-controlled areas protected from precipitation. Capable of

withstanding heavy usage and prolonged periods of operation.

Physical Characteristics Height: 10.7 cm (4.2 in.)

Width: 20.3 cm (8.0 in.)

Depth: 24.1 cm (9.5 in.), excluding handle

Weight: 2.1 kg (4.6 lb) with batteries

Batteries 6 volts/4 cells, range 3.4 Vdc ~ 6.5 Vdc

Four non-rechargeable D-cell alkaline batteries. New batteries will

provide not less than 100 hours of continuous operation under normal

indoor-environment conditions.

Buttons Master Power, lid release/ON-OFF, shock

Speaker Volume output: Hi, Med., Low

Operating Temperature 3° to 38° C (37° to 100° F)

Storage Temperature –10° to 60° C (14° to 140° F) (remove batteries for storage)

Water Resistance Spillage resistance per IEC 601-1, part 44.3