Operating instructions

LIFEPAK CR–T Trainer Operating Instructions 21
©2002-2007 Medtronic, Inc.
Setup
Setup
CPR Time
To change CPR Time 1 or CPR Time 2:
1 Press the
RED SELECT button.
2 Press the
NO SHOCK ADVISED button (T1) for CPR Time 1 and then proceed with steps 3 and 4.
–or–
Press the
ATTENTION button (T2) for CPR Time 2 and then proceed with steps 3 and 4.
3 Press the
RIGHT X ARROW button to advance through the possible CPR time intervals. (Each bar
illuminates red as you advance to it.)
4 When the bar corresponding to the desired time illuminates red, press the
RED SELECT button to save
the selection. The signal sensor flashes, indicating that the selection has been saved. The Trainer
enters simulated OFF status.
Figure 12 shows the LED displaying the CPR Time set to 90 seconds.
Figure 12 CPR Time Options
Language Option
You can set the voice prompts to be delivered in any of up to six languages, depending on the language
group ordered with your Trainer. There are nine language groups available. Table 10 lists the language
groups and the languages available in each group.
To change the language option:
1 Press the
RED SELECT button.
2 Press the
VOLUME CONTROL button (OP, L).
3 Press the
RIGHT X ARROW button until the desired bar illuminates red.
Table 10 Language Groups
Configuration Bar 1 Bar 2 Bar 3 Bar 4 Bar 5 Bar 6
Group 1 English Norwegian Danish Swedish Finnish
Group 2 English German French Dutch
Group 3 English Polish Hungarian Czech Russian
Group 4 English Japanese Cantonese Mandarin
Group 6 English
Group 7 English Italian Spanish
Group 8 English Iberian
Portuguese
Spanish Icelandic
Group 9 English Romanian Hebrew Lithuanian Slovak Slovenian
CPR Time
Bar Number
1234567890
15 30 45 60 90 120 180