Operating instructions

6 LIFEPAK CR–T Trainer Operating Instructions

Getting Started

Figure 4 Inside Features after Opening the Electrode Packet

Table 4 Inside Features after Opening the Electrode Packet

20 Speaker Speaker that projects the voice prompts and tones.

21 Electrode pad indicators Indicators that automatically flash red when the Trainer lid is opened,

alerting the trainee that the electrode pads are NOT applied to the

training manikin.

Indicators turn solid green when the instructor presses the

ELECTRODE

PADS

button to indicate the electrode pads were properly applied during

the training scenario.

Refer to page 10 for information about using the

ELECTRODE PADS

button.

22 Training electrode pads Training electrode pads to be applied to the training manikin.

23 Blue plastic Blue plastic liner that protects the adhesive until the electrode pads are

used.

24 Training shock button Pressing this red flashing button simulates the delivery of a shock by the

defibrillator semiautomatic model. (The trainee cannot deliver a

simulated shock unless a Trainer voice prompt instructs them to do so.)

When training simulates the defibrillator automatic model, cover this

button with the yellow shock button cover.

25 Electrode connector Connects the electrode pads to the Trainer. The connection is not

functional—simulated connection/disconnection is initiated by means of

the remote control.