User's Manual
Table Of Contents
- Table of Contents
- Instructions for use
- Getting started
- Using the SEEQ MCT System during the monitoring period
- What to do at the end of monitoring
- Indications for use, contraindications, and precautions
- Services for physicians
- Specifications, compliance, and symbols
- Frequently asked questions
- What is a Wearable Sensor?
- How long will my Wearable Sensor last?
- What information is transmitted to my physician?
- How can I report my symptoms?
- Can I take a shower while wearing my Wearable Sensor?
- Will I need to change the battery in the Transmitter or the Wearable Sensor?
- How close must I be to the Transmitter to ensure that the data collected by my Wearable Sensor is transmitted?
- How often do I need to change the Wearable Sensor device?
- What if the Wearable Sensor causes my skin to itch?
- Should I carry the Transmitter with me when I travel?
- Will I need to notify security screeners about my Wearable Sensor?
- Can I wear a Wearable Sensor through an electronic antitheft system, such as in a store?
- Can I use microwave ovens or TV remotes while wearing a Wearable Sensor?
- Can I be close to wireless phones, WiFi, or other electromagnetic devices?
- Can I carry my cellphone while wearing the Wearable Sensor?
- Will hot or cold environments affect the Wearable Sensor performance?
- Is my medical data protected during transmission?
SEEQ MCT Instructions for use English 5
M958549A001 Rev B
Refer to doc # A73903 for Printing
Instructions.
M958549A_ch.fm 3/12/15 2:34 pm
4" x 8" (101 mm x 203 mm)
Medtronic Confidential
mdvtldct_R1.5
Step 2: Charge the Transmitter
▪ Connect the Transmitter Charger connector to the Transmitter
and plug it into a standard electrical outlet.
▪ If the lights on the Transmitter do not turn on, briefly press the
Power Button for less than 1 second to power-up the
Transmitter.
▪ If LED indicators turn ON, the Transmitter has powered up.
▪ To fully charge the battery, it is important to keep the
Transmitter connected to wall power for at least 6 hours.
The Transmitter Charger is used to
charge the Transmitter.
The Prep Wipes are used for
cleaning skin before applying the
Wearable Sensor.
Product Literature
Literature includes these instructions
and other information for patients.
Power Button
Connector