Users Manual
Table Of Contents
Calibration reminder
The Calibration reminder is available if you use the Sensor feature. This feature
helps you remember to calibrate your sensor. For example, if you set your
reminder to four hours, you receive a Calibrate by message four hours before the
next BG meter reading is due.
To turn on or off, or change the Calibration reminder:
1. Press
and go to the Calibration screen.
Options > Reminders > Calibration
2. Select Reminder to turn the reminder on or off.
3. If you turn on the reminder, select Time and enter a time between
five minutes and six hours. The time can be set in five-minute increments.
4. Select Save.
■
Reminders
Reminders 155