Users Manual

Note: The number of units that remain in your reservoir can be found on
the Quick Status screen. For more information on accessing the Status
Screens, see Status screens, on page 50.
WARNING: When the pump detects a low reservoir condition
during a bolus or fill cannula delivery, the Low reservoir alert
displays. When delivery has finished, check the amount left in the
reservoir to make sure your pump does not run out of insulin, as
this could lead to an under delivery of insulin, which may cause
hyperglycemia.
Low Reservoir reminder setup:
1. Press
and go to the Low Reservoir screen.
Options > Reminders > Low Reservoir
2. Select Units to enter the number of units. Set a value from 5 to 50 units.
3. Select Save.
Set Change reminder
The Set Change reminder tells you when your infusion set is due to be changed.
After you turn on this reminder, it automatically tracks the time between infusion
set changes and reminds you to change your infusion set.
To turn on or off, or change the Set Change reminder:
1. Press
and go to the Set Change screen.
Options > Reminders > Set Change
2. Select Reminder to turn the reminder on or off. If you turn on the reminder,
select Time and choose two or three days for the reminder.
3. Select Save.
154 Chapter 8