User Manual

To deliver a Square Wave bolus with the Bolus Wizard feature:
1. Press
and go to the Bolus Wizard screen.
Bolus > Bolus Wizard
The Bolus Wizard screen shows your current BG meter reading, if applicable,
and any insulin that is still active from previous boluses. For more information
about active insulin, see About active insulin, on page 96. For more information
about the meter, see About your Accu-Chek Guide Link meter, on page 133.
2. If you are not using a paired meter, you can select BG to manually enter your
BG meter reading.
Note: If you choose not to enter a BG meter reading, three dashes
appear on the screen instead.
3. Select Carbs to enter the amount of carbs in your food.
4. Review your calculated bolus amount in the Bolus field. If you want to
change the bolus amount, select Bolus and make your desired change.
Remember, if there is a correction bolus amount calculated, you are not able
to give a Square Wave bolus.
Note: If you change your bolus amount, the word “Modified”
appears next to the new bolus amount.
5. Select Next to review your bolus information.
6. Select Square.
The Bolus Wizard screen appears with your bolus amount.
7. Select Duration to adjust the time period over which you want your Square
Wave bolus to be delivered. The duration can be set in 15-minute increments
from 30 minutes to 8 hours.
8. Select Deliver Bolus to start your bolus.
■
Bolus
Bolus 103