User Manual

Turning on or off the Dual Wave bolus feature
You can deliver a Dual Wave bolus only after you turn on the Dual Wave bolus
feature.
To turn on or turn off the Dual Wave bolus feature:
1. Press
and go to the Dual/Square screen.
Options > Delivery Settings > Dual/Square Wave
2. Select Dual Wave to turn the feature on or off.
3. Select Save.
Delivering a Dual Wave bolus with the Bolus Wizard feature
You can deliver a Dual Wave bolus with the Bolus Wizard feature only after you
turn on the Dual Wave bolus feature.
To deliver a Dual Wave bolus with the Bolus Wizard feature:
1. For a correction bolus or a food bolus with a correction, use your BG meter to
check your BG. For a food bolus only, go to step 2.
2. Press
and go to the Bolus Wizard screen.
Bolus > Bolus Wizard
The Bolus Wizard screen shows your current BG meter reading, if applicable,
and any insulin that is still active from previous boluses. For more information
about active insulin, see About active insulin, on page 96. For more information
about the meter, see About your Accu-Chek Guide Link meter, on page 133.
3. If you are not using a paired meter, you can select BG to manually enter your
BG meter reading.
Note: If you choose not to enter a BG value, three dashes appear
on the screen in place of the BG value.
4. For a food bolus, select Carbs to enter the carb count of your meal. For a
correction bolus where no food was eaten, leave the Carbs value as 0.
5. Review your calculated Bolus amount. If you want to change the amount,
select Bolus and make your desired change.
■
Bolus
Bolus 105