Product Info

The following happens when you start the search process:
• On your pump, a message appears to let you know your pump is
searching.
• On your transmitter, a green light starts to flash.
Note: The search process can take up to two minutes. You cannot
access your pump screens or suspend your pump during the search
process.
The Select Device screen appears with a list of available devices.
6. Select the CGM device that matches the serial number on the back of the
transmitter.
7. Ensure the transmitter serial number on your pump screen matches the serial
number on the back of your transmitter, and then select Confirm.
A message appears if the pump and transmitter are paired successfully. If the
Sensor feature is turned on, the Connection icon
appears on the Home
screen.
If your pump does not find your transmitter, the Device not found alert
appears. See the following procedure, If your pump does not find your
transmitter.
■
Setting up CGM
Setting up CGM 201