Product Info

11. If you entered an End time of anything other than 12:00 A, another time
segment appears. After you enter the high SG settings, select Done.
12. Review your settings and select Save.
To change your high SG settings:
1. Press
and go to the High Setup screen.
Options > SmartGuard > High Setup
The High Setup screen appears.
2. Select Edit.
3. Select and adjust the time segment you want to change.
4. Select any alert setting to turn it on or off or to adjust the setting.
5. Select Next.
6. Select Done.
7. Review your settings and select Save.
High Snooze
The High Snooze option is available once you set your high SG settings. The High
Snooze option lets you set the amount of time that you want to wait before you
are reminded that an alert condition still exists. You are alerted again only if the
high alert condition still exists after the specified snooze time.
To set the High Snooze:
1. Press
and go to the Snooze screen.
Options > SmartGuard > Snooze
The Snooze screen appears.
2. Select High Snooze and enter a value in 5-minute increments from 5 minutes
to 3 hours.
3. Select Save to save your Snooze settings.
Setting up the low SG settings
The steps below show you how to set up the low SG settings. For details on the
low SG settings, see Low SG settings, on page 178.
■
Setting up CGM
Setting up CGM 195