Product Info

7. If you turned on the Rise Alert, you must set the Rise Limit. Scroll down and
select Rise Limit to access this option.
The Rise Limit screen appears.
8. Select one, two, or three arrows for the rise rate. To use a custom rate, go to
step 9.
•
Select
for an alert when your SG has been rising at a rate of 1 mg/dL
per minute or more.
•
Select
for an alert when your SG has been rising at a rate of
2 mg/dL per minute or more.
•
Select
for an alert when your SG has been rising at a rate of
3 mg/dL per minute or more.
Select OK, and go to step 11.
Note: These arrows appear on your Home screen to indicate the
rate at which your SG has been rising.
9. To enter a custom rise limit, do the following:
a. Select Custom. The Custom Limit screen appears.
b. Select Rise Limit and set a rise rate in 0.1 mg/dL/min increments from 1
to 5 mg/dL/min.
c. Select OK to return to the Rise Limit screen, and then select OK again to
confirm your settings.
10. After you set all the high SG settings for the selected time segment, select
Next to continue.
194 Chapter 10