Product Info

Low Limit
20 mg/dL above Low Limit
2 hours
STOP
START
Michael has responded to his alert. The pump will suspend insulin delivery and
alarm again if his sensor value reaches or falls below his low limit again.
Turning on the Sensor feature
You must turn on the Sensor feature before you can set up your glucose alerts
and start monitoring your SG levels.
To turn on the Sensor feature:
1. Press
and go to the Sensor Settings screen.
Options > Utilities > Sensor Settings
2. Select Sensor to turn on the sensor feature. The sensor settings become
accessible.
Setting up the high SG settings
The steps below show you how to set up the high SG settings. For details on your
high SG settings, see High SG settings, on page 177.
Note: When you enter your settings, you first define the time segment,
and then select the high SG settings you want during that time segment.
To set up the high SG settings:
1. Press
and go to the High Setup screen.
Options > SmartGuard > High Setup
192 Chapter 10