How-To Guide

Changing your insulin sensitivity factor
The insulin sensitivity factor option is only available if the Bolus Wizard feature is
turned on.
To change your insulin sensitivity factor:
1. Press
and go to the Sensitivity screen.
Options > Delivery Settings > Bolus Estimate Setup > Insulin Sensitivity
Factor
2. Select Edit.
3. Select the insulin sensitivity factor to adjust the Start time, the End time, and
the Sensitivity amount. You can set up to eight different sensitivity amounts
using different time segments. The time segments must cover a 24-hour
period.
If you set a value that is outside the typical range of 20 to 100 mg/dL per
unit, a screen appears and tells you to confirm your setting.
4. Select Save after you make your changes.
Changing your Bolus Wizard BG target
Your target range can be from 60 to 250 mg/dL. The Bolus Wizard BG target
option is only available if the Bolus Wizard feature is turned on.
To change your Bolus Wizard BG target range:
1. Press
and go to the BG Target screen.
Options > Delivery Settings > Bolus Estimate Setup > BG Target
2. Select Edit.
3. Select the BG target to adjust the Start time, the End time, and the Lo (low)
and Hi (high) BG Target values. Your high value cannot be less than your low
value. You can set up to eight different values using different time segments.
The time segments must cover a 24-hour period.
If your BG target is outside the typical range of 90 to 140 mg/dL, a screen
appears and tells you to confirm your setting.
4. Select Save after you make your changes.
■
Bolus
Bolus 95