How-To Guide

Bolus speed
The Bolus Speed setting sets the rate at which your pump delivers bolus insulin.
You can set a Standard rate (1.5 units per minute), or a Quick rate (15 units
per minute).
To set your bolus speed:
1. Press
and go to the Bolus Speed screen.
Options > Delivery Settings > Bolus Speed
2. Select Standard or Quick.
3. Select Save.
Bolus Wizard feature
The Bolus Wizard feature uses your individual Bolus Wizard settings to calculate an
estimated bolus amount based on the BG values and carbs that you enter. Work
with your healthcare professional to define your personal settings, which include
your carb ratio, insulin sensitivity, BG target range, and active insulin time.
Note: If you do not know how to count carbs, consult with your
healthcare professional before using the Bolus Wizard feature.
After you set up the Bolus Wizard feature, you can use it to calculate and deliver a
food bolus, a correction bolus, or a food plus correction bolus using a Normal
bolus (see Delivering a Normal bolus with the Bolus Wizard feature, on page 98),
Square Wave bolus (see Delivering a Square Wave bolus with the Bolus Wizard
feature, on page 102), or Dual Wave bolus (see Delivering a Dual Wave bolus with the
Bolus Wizard feature, on page 105).
The following sections describe how to set up the Bolus Wizard feature. Bolus
delivery instructions are provided in the individual sections for each bolus type.
Understanding your Bolus Wizard settings
Your pump tells you to enter the following settings when you first turn on the
Bolus Wizard feature. Get your prescribed settings from your healthcare
professional, and always consult your healthcare professional before you change
your settings. The setup procedure begins on page 91.
90 Chapter 4