How-To Guide

Options > Delivery Settings > Preset Temp Setup
2. Select Add New.
3. Select a name for the preset temp basal rate. For example, Temp 1, High
Activity, Moderate Activity, Low Activity, or Sick.
4. Select Type to select Percent or Rate.
5. If you use Percent, enter a percentage. If you use Rate, enter the rate in units
per hour. You cannot exceed your max basal rate.
6. Set the Duration for the preset temp basal to be active. The duration can be
set in 15-minute increments from 30 minutes to 24 hours.
7. Select Save.
To edit, rename, or delete a preset temp basal rate:
1. Press
and go to the Preset Temp Setup screen.
Options > Delivery Settings > Preset Temp Setup
The Preset Temp Setup screen appears. This screen shows the settings for any
existing preset temp.
2. Select the desired preset temp basal.
Note: You cannot select a preset temp basal rate that is currently in
use.
3. The next screen displays the temp basal info. Do any of the following:
• Select Edit to adjust the Type (Percent or Rate), the Percentage or Rate
amount, and the Duration for the preset temp basal rate.
• Select Rename to assign a different name to the preset temp basal rate.
When the Select Name screen appears, select any available name from
the list.
• Select Delete to delete the preset temp basal rate.
Starting a preset temp basal rate
You must set up preset temp basal rates before you can use the Preset Temp
feature. For more information, see Preset temp basal rates, on page 74.
■
Basal
Basal 75