How-To Guide

To activate your basal pattern, see Changing from one basal pattern to another,
on page 70.
Editing, copying, or deleting a basal pattern
To edit, copy, or delete a basal pattern:
1. Press
and go to the Basal Pattern Setup screen.
Options > Delivery Settings > Basal Pattern Setup
The Basal Pattern Setup screen shows all of your existing basal patterns.
2. Select the desired basal pattern.
3. Select Options.
4. Do any of the following:
• Select Edit to adjust the End time or rate values for one or more of the
basal rates in this basal pattern.
• Select Copy to copy the basal rate information from the selected basal
pattern to a new basal pattern. When the Select Name screen appears,
you can select any available name from the list. Use the Edit option to
adjust the new basal pattern as desired.
• Select Delete to delete the selected basal pattern. You cannot delete the
active basal pattern.
Changing from one basal pattern to another
When you change to a new basal pattern, your pump delivers your basal insulin
according to the basal pattern you selected.
To change to a different basal pattern:
1. Press
and go to the Basal Patterns screen.
Basal > Basal Patterns
The Basal Patterns screen shows the basal patterns you have set up. The
active basal pattern is indicated with a check mark.
2. Select the desired basal pattern.
The Basal screen shows the details for the selected basal pattern.
3. Select Begin.
70 Chapter 3