Product Info

After you enter your pump settings, you have the option of entering the following
Bolus Wizard settings:
•Carb ratio
• Insulin sensitivity factor
•BG target
To enter your pump settings:
1. Select your language, and then select Next to go to each new screen.
2. When the Select Time Format screen appears, select a 12 Hour or a 24 Hour
time format.
3. When the Enter Time screen appears, adjust the setting to the current time. If
you are using a 12-hour clock, be sure to specify AM or PM.
4. When the Enter Date screen appears, adjust the Year, Month, and Day to the
current date.
5. When the Active Insulin Time screen appears, enter the Duration.
For details, see About active insulin, on page 96.
6. Enter the End time and the Rate for your first basal rate. You can enter more
basal patterns after you complete the startup wizard.
For details, see Adding a new basal pattern, on page 67.
After you complete your basal pattern, a screen appears for you to review
your basal information.
7. A screen appears and tells you to set up the Bolus Wizard settings. Do one of
the following:
• Select Yes to continue to enter your settings, and then continue to the
next section.
• Select No if you do not want to enter your Bolus Wizard settings. A
message appears to confirm the startup is complete. Select OK to
continue to use your pump.
To enter your Bolus Wizard settings:
1. When your pump shows a list of settings for the Bolus Wizard feature, make
sure you have the values you need before you continue.
■
Troubleshooting
Troubleshooting 287