Product Info
Table Of Contents
- M998590A011DOC_A_FINAL_UserGuide_Part2
- Troubleshooting
- Maintenance
- Product specifications and safety information
- Product specifications
- Alarm and alert escalation
- Altitude range
- Audio frequency
- Backlight
- Basal delivery
- BG Target
- BG meter value
- Bolus delivery
- Bolus Wizard feature default settings
- Bolus Wizard feature specifications
- Carb ratios
- Delivery accuracy
- Easy Bolus feature
- Environmental conditions
- Essential performance
- Filling the infusion set and cannula
- Infusion pressure
- Insulin delivery default settings
- Bolus settings
- Basal settings
- Insulin sensitivity factor
- Low Reservoir reminder
- Max Bolus
- Normal bolus
- Occlusion detection
- Percent temp basal
- Program safety checks
- Pump dimensions
- Pump memory
- Pump weight
- Sensor default settings
- Wireless communication
- FCC notice
- IEC60601-1-2:4th Edition notice
- Guidance and manufacturer's declaration
- Icon glossary
- Product specifications
- 670G Performance Data and Technical Information
CAUTION: Do not use a carbon zinc battery in your pump. Carbon
zinc batteries are not compatible with the pump. Use of carbon zinc
batteries can cause the pump to report inaccurate battery levels.
Carbon zinc batteries have a short shelf life, they deteriorate rapidly in
cold weather, and oxidation of the zinc wall eventually causes the
contents to leak out. They will not perform as well as other battery
types to power the pump and may potentially damage your pump.
Note: Do not use cold batteries because the battery life may incorrectly
appear as low. Allow cold batteries to reach room temperature before
you insert them in your pump.
Inserting the battery
Your pump does not ship with the battery cap on. The battery cap is located in
the pump box with the accessories.
battery cap
battery
pump clip
To insert the battery:
1. Insert the new or fully charged AA battery. Be sure to insert the flat end first.
38 Chapter 2