Product Info
Table Of Contents
- M998590A011DOC_A_FINAL_UserGuide_Part2
- Troubleshooting
- Maintenance
- Product specifications and safety information
- Product specifications
- Alarm and alert escalation
- Altitude range
- Audio frequency
- Backlight
- Basal delivery
- BG Target
- BG meter value
- Bolus delivery
- Bolus Wizard feature default settings
- Bolus Wizard feature specifications
- Carb ratios
- Delivery accuracy
- Easy Bolus feature
- Environmental conditions
- Essential performance
- Filling the infusion set and cannula
- Infusion pressure
- Insulin delivery default settings
- Bolus settings
- Basal settings
- Insulin sensitivity factor
- Low Reservoir reminder
- Max Bolus
- Normal bolus
- Occlusion detection
- Percent temp basal
- Program safety checks
- Pump dimensions
- Pump memory
- Pump weight
- Sensor default settings
- Wireless communication
- FCC notice
- IEC60601-1-2:4th Edition notice
- Guidance and manufacturer's declaration
- Icon glossary
- Product specifications
- 670G Performance Data and Technical Information
• Dispose of transfer guard safely in sharps container.
• Never prime the set or attempt to free a clogged line while the set is inserted.
You may accidentally inject too much medication.
• Do not put disinfectants, perfumes, or deodorants on the infusion set as these
may affect the integrity of the set.
• Dispose of the infusion set and introducer needle safely, in a sharps container,
after a single use. Do not clean or re-sterilize.
• Store infusion sets in a cool, dry place. Do not leave infusion sets in direct
sunlight or inside a vehicle.
• Only use reservoir and infusion sets manufactured or distributed by Medtronic
Diabetes. The pump has undergone extensive testing to confirm appropriate
operation when used with compatible reservoirs and infusion sets
manufactured or distributed by Medtronic Diabetes. We cannot guarantee
appropriate operation if the pump is used with reservoirs or infusion sets
offered by third parties. We are not responsible for any injury or
malfunctioning of the pump that may occur in association with such use.
• Use aseptic techniques when temporarily disconnecting the set and consult
your healthcare provider on how to compensate for missed medication when
disconnected.
• If infusing insulin, carefully monitor your BG levels when disconnected and
after reconnecting.
• Reservoir and transfer guard are sterile, non-pyrogenic, and for single use only.
• Do not clean or re-sterilize. Reuse of the reservoir may lead to insulin
degradation, infection, inaccurate medication delivery, and leaks which may
cause damage to the pump.
• Inaccurate medication delivery, infection, or site irritation may result from
improper insertion and maintenance of the infusion site.
• If using this infusion set for the first time, do the first set-up in the presence of
your healthcare professional.
• Do not leave air in the infusion set. Prime completely.
• Replace the infusion set every 48 to 72 hours according to Centers for Disease
Control guidelines, or per your healthcare professional’s instructions.
18 Chapter 1