Product Info
Table Of Contents
- M998590A011DOC_A_FINAL_UserGuide_Part2
- Troubleshooting
- Maintenance
- Product specifications and safety information
- Product specifications
- Alarm and alert escalation
- Altitude range
- Audio frequency
- Backlight
- Basal delivery
- BG Target
- BG meter value
- Bolus delivery
- Bolus Wizard feature default settings
- Bolus Wizard feature specifications
- Carb ratios
- Delivery accuracy
- Easy Bolus feature
- Environmental conditions
- Essential performance
- Filling the infusion set and cannula
- Infusion pressure
- Insulin delivery default settings
- Bolus settings
- Basal settings
- Insulin sensitivity factor
- Low Reservoir reminder
- Max Bolus
- Normal bolus
- Occlusion detection
- Percent temp basal
- Program safety checks
- Pump dimensions
- Pump memory
- Pump weight
- Sensor default settings
- Wireless communication
- FCC notice
- IEC60601-1-2:4th Edition notice
- Guidance and manufacturer's declaration
- Icon glossary
- Product specifications
- 670G Performance Data and Technical Information
Product specifications and safety
information
This chapter provides detailed product specifications and safety information.
Product specifications
Alarm and alert escalation
The following alerts may escalate to a siren if not cleared:
• Alert before high
• Alert before low
• Alert on high
• Alert on low
• Basal delivery resumed
• BG not received
• Calibration not accepted
•Calibrate now
• Change sensor
• Check connection
• Lost sensor signal
• No calibration occurred
• Possible signal interference
•High SG
•Rise Alert
• Sensor expired
• Sensor signal not found
• Low SG XX mg/dL (XX represents 50 mg/dL or below)
• Sensor updating
• Transmitter battery depleted
For alerts that escalate to a siren, the pump will begin to siren if the alert is not
cleared in 10 minutes. Before the siren occurs, your pump will beep, vibrate, or
both, depending on your audio settings.
Product specifications and safety information 299
■
Product specifications and safety information