How-To Guide

Title and text Type Explanation Next steps
Medical device
CALL FOR
EMERGENCY
ASSISTANCE. I
have diabetes.
Alarm Your pump is
suspended due
to low SG, and
you have not
responded to the
alarm within 10
minutes.
Select Dismiss.
Immediately call for emergency
assistance.
No calibration
occurred
Confirm sensor
signal. Calibrate
by XX:XX AM/PM.
Alert The transmitter
was unable to
receive the
calibration BG
meter readings
from the pump.
Select OK to clear the alert.
Check the status icons on your
Home screen to ensure that your
pump has a signal from your
sensor. If there is no sensor
signal, see My pump cannot find
the sensor signal, on page 288.
Calibrate again by the time
shown on the pump screen to
ensure you continue SG
monitoring.
No calibration
occurred
Confirm sensor
signal. Check BG
again to calibrate
sensor.
Alert The transmitter
was unable to
receive the
required
calibration BG
from the pump.
Calibration is
required by the
system for SG
values to resume.
"Calibration
required" appears
on your sensor
graph.
Select OK to clear the alert.
Take another BG meter reading
and calibrate again.
Alarms, alerts, and messages
Alarms, alerts, and messages 269