How-To Guide
Table Of Contents
- M998590A011DOC_A_FINAL_UserGuide_Part1_5
- Setting up CGM
- Using CGM
- SmartGuard Auto Mode
- About SmartGuard Auto Mode
- Before using SmartGuard Auto Mode
- Setting up SmartGuard Auto Mode
- SmartGuard Auto Mode Readiness
- Home screen with SmartGuard Auto Mode
- Using SmartGuard Auto Mode
- Safe Basal
- Block Mode when in SmartGuard Auto Mode
- Setting Temp Target
- SmartGuard Auto Mode sensor graph
- Enter BG
- SmartGuard Auto Mode Bolus
- Alert Silence
- Exiting SmartGuard Auto Mode
- Returning to SmartGuard Auto Mode
- M998590A011DOC_A_FINAL_UserGuide_Part2
Title and text Type Explanation Next steps
Basal delivery
resumed
Maximum 2 hour
suspend time
reached. SG is
still under Low
limit. Check BG.
Alarm Your pump is
resuming basal
insulin delivery
two hours after a
Suspend before
low or Suspend
on low event
occurred.
• Your pump has resumed basal
insulin delivery; however, your SG
value is still at or below your low
limit.
• Select OK to clear the alarm.
• Check your BG.
• Follow instructions from your
healthcare professional and
continue to monitor your BG.
BG not received
Place pump
close to
transmitter.
Select OK to
resend BG to
transmitter.
Alert The transmitter
was unable to
receive the
calibration BG
meter readings
from the pump.
• Move your pump and transmitter
closer together.
• Select OK. Your pump tries again
to send your BG to your
transmitter for sensor calibration.
Calibrate now
Check BG and
calibrate sensor.
Alert A BG meter
reading is
needed
immediately to
calibrate your
sensor so that
you can continue
receiving SG
readings.
If you are unable to calibrate now,
you can use the Snooze feature.
Set the desired time, and select
Snooze. If you do not calibrate
before the Snooze time is up, the
Calibrate now alert occurs again.
■
Alarms, alerts, and messages
Alarms, alerts, and messages 265