User's Manual

MySentry Monitor
40 Specifications
Voltage dips, short
interruptions and voltage
variations on power supply
lines
IEC 61000-4-11
<5% U
T
(>95% dip in U
T
)
for 0.5 cycle
<5% UT
(>95% dip in UT)
for 0.5 cycle
TBD
40% U
T
(60% dip in U
T
)
for 5 cycles
40% UT
(60% dip in UT)
for 5 cycles
TBD
70% U
T
(30% dip in U
T
)
for 25 cycle
70% UT
(30% dip in UT)
for 25 cycle
TBD
<5% U
T
(>95% dip in U
T
)
for 5 seconds
<5% UT
(>95% dip in UT)
for 5 seconds
TBD
Power frequency (50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m 3 A/m TBD
NOTE: U
T
is the a.c. mains voltage prior to application of the test level.
Guidance and Manufacturers Declaration – Electromagnetic Immunity
The MySentry system is intended for use in the electromagnetic environment specified below. The customer or the
user of the MySentry system should assure that it is used in such an environment.
Immunity Test IEC 60601 Test Level Compliance Level Electromagnetic
Environment
– Guidance