User's Manual
9 Dry the transmitter and tester with a clean, dry cloth.
10 Holding the tester, wipe the transmitter with 70% isopropyl alcohol.
11 Place the transmitter and tester on a clean, dry cloth and air dry them completely.
12
Disconnect the tester from the transmitter.
Removing adhesive residue
You may need to perform this procedure only if you have used optional occlusive
dressing, which may leave adhesive residue on the transmitter. If you visually inspect the
transmitter and see adhesive residue on it, follow the instructions below.
-12-
MP6025977-021 / 1
RELEASED