User's Manual

Warning: Cracking, flaking, or damage of the housing are signs of deterioration
and the performance of the device may be compromised. This may
affect the ability to properly clean and disinfect the transmitter. If these
signs are noted, stop using the device and call the 24 Hour HelpLine.
The device must be discarded according to local regulations for battery
disposal (non-incineration).
To clean the transmitter:
1
Wash your hands thoroughly.
2
Attach the tester to the transmitter.
3 If optional occlusive dressing was used and there is adhesive residue on the
transmitter, see Removing adhesive residue, on page 12.
4
Rinse the transmitter under room temperature tap water for at least one minute, and
until visibly clean. Make sure all hard-to-reach areas are rinsed completely.
5 Prepare a cleaning solution using one teaspoon (five milliliters) of mild liquid soap per
one gallon (3.8 liters) of room temperature tap water. Never use organic solvents,
such as paint thinner or acetone, to clean the transmitter.
-10-
MP6025977-021 / 1
RELEASED