User's Manual

Caution: Only use the Watertight Tester with the transmitter. Do not use any

other test plug.

✓

Inspecting the transmitter connector pins

This image is an example of how the connector pins should look.

connector opening

connector pins

housing

Look inside the transmitter’s connector opening to make sure that the connector pins are

not damaged or corroded. If the connector pins are damaged or corroded, the transmitter

cannot communicate with the charger or pump. Contact the 24 Hour HelpLine. It may be

time to replace your transmitter.

Also look for moisture inside the connector opening. If you see any moisture, allow the

transmitter to dry for at least one hour. Moisture inside the connector opening could

cause the transmitter to not work properly, and could cause corrosion and damage over

time.

-8-

MP6025977-021 / 1

RELEASED