User Manual

the charger. A green LED inside the MiniLink will blink for about 5 seconds and

then turn off. This confirms that the MiniLink is ready to use.

Note: If the green LED inside the MiniLink does not blink, re-connect the

MiniLink to the charger for at least one minute. After one minute, remove

the MiniLink from the charger and watch for the MiniLink to flash green.

Connect to the sensor.

Caution: If the MiniLink LED is still lit or flashing, do not connect

the MiniLink to the charger.

Checking battery status

The charger’s red LED will flash if the charger’s internal battery is low or if the

MiniLink battery is bad.

If the charger AAA battery is low, the red LED will flash once about every 2

seconds. Replace with new AAA battery.

If the MiniLink’s battery is bad, the red LED on the charger will blink fast for about

2 seconds, turn off for about 2 seconds, and then repeat the cycle. Call the

Medtronic Diabetes 24 Hour HelpLine.

DERXWVHFV

DERXWVHFV DERXWVHFV

DERXWVHFV