User Manual

5
Note: A new AAA battery in the charger may charge the MiniLink over 40 times
before it needs to be replaced.
Charging the MiniLink
1 Insert the MiniLink into the charger. Line
up the MiniLink connector (flat side down)
with the charger and push the two
components together fully.
Note: The charger contains green and red
LEDs (lights).
2 When the MiniLink is first connected, the
charger’s green LED will blink rapidly for
1-2 seconds as charger powers on.
3 As the MiniLink charges, the charger’s green LED will flash occassionally.
4 When charging is complete, the charger’s green LED will turn on for 15 to 20
seconds and then turn off. Once the LED is off, disconnect the MiniLink from
$JUHHQ/('VKRZV
FKDUJHULVZRUNLQJ
$UHG/('DSSHDUVLI
FKDUJHUEDWWHU\QHHGV
UHSODFHPHQW25
WKHUHLV
DSUREOHP
ZLWKWKH
0LQL/LQN
EDWWHU\
DERXW
VHF
DERXW
VHF