User Manual

Troubleshooting and alarms 31
Chapter 5
Troubleshooting and alarms
Alarms
Your pump has a sophisticated network of safety checks and systems. If the safety network detects
anything unusual, your pump notifies you of conditions that require your immediate attention. The
backlight illuminates the pump screen, and the alarm message displays on the screen. Alarms put the
pump in “Attention” mode.
NOTE - The STATUS screen shows any alarms that are active.
➠ Why are alarms important?
Your pump monitors activities and notifies you if there is an unusual
pump status or your attention is required.
An alarm gradually becomes higher in volume until you turn it off.
If the vibrate mode is on, all alarms start as vibrations and then
change to beeps. For your safety, if there is no response within ten
(10) minutes, the beeps change to a siren. The pump will alarm with
a siren and/or a vibration every minute until the alarm is cleared.
when a solid circle appears,
follow the instructions on the
screen.