User Manual

30 Chapter 4
Removing transmitter and sensor
Disconnecting the sensor from the transmitter
Hold the glucose sensor assembly in one hand and the sensor connector in the other hand. While
pinching the snap arms on the sides of the glucose sensor assembly together, gently pull the glucose
sensor assembly away from the sensor connector.
Removing the transmitter
Remove by pulling gently on the transmitter. Do not pull off by the sensor connector wire.
Removing the sensor
Remove the outer tape from over the sensor. Gently pull the sensor from your body. When removed
place in a sharps container.
Storage and handling
Store sensors in refrigerator at +2 to 10°C (+36 to +50° F). Do not freeze.
Prior to opening, allow the sensor package to reach room temperature and 5% to 95% humidity to
prevent condensation.
Sen-serter maintenance
Cleanse Sen-serter with soapy water, using liquid detergent or other household soaps. Allow to dry.
Disinfect Sen-serter by wiping with 10% bleach solution or 70% isopropyl alcohol.
Store Sen-serter in the released position to maintain optimum product performance and life.