User Manual

Starting the sensor 23
Enter meter BG
After the two hour initialization period you must enter a BG reading into the pump to calibrate the
sensor. If you are using the Paradigm Link this will be done automatically with each fingerstick. To
enter a value manually perform the following steps.
1 In the MAIN MENU, select
Sensor and press ACT.
2 Select Enter Meter
BG, press ACT.
3 Use the up and down arrow
buttons to enter your BG, press
ACT.
MAIN MENU
Bolus
Suspend
Sensor
ACT
SENSOR MENU
Enter Meter BG
Sensor Update Hist.
Sensor Alarm History
ACT
(flashing) set, then
press
ACT
ENTER BG
140
mg/dL
ACT