User Manual

22 Chapter 3
Starting the sensor
You are now ready to start your sensor so the sensor and the pump can communicate with each
other. To do this, follow the steps below:
NOTE - If screen times out, start again, DO NOT disconnect sensor.
1 Press ACT from the HOME
screen. In the MAIN MENU,
select Sensor and press
ACT.
2 Select Sensor Start, press ACT. 3 New Sensor will be
highlighted, press ACT.
4 Connect your sensor now if you have not
already done so. Press ACT.
5 Press ACT.
MAIN MENU
Bolus
Suspend
Sensor
ACT
SENSOR MENU
Sensor Update Hist.
Sensor Alarm History
Sensor Start
ACT
Reconnect Old Sensor
Find Lost Sensor
SENSOR START MENU
New Sensor
ACT
NEW SENSOR
Connect new sensor,
then press ACT, or
ESC to abort
ACT
SENSOR READY 2 HRS
Alert will sound when
meter BG is required.
Press any key to cont.