User Manual

Starting the sensor 21
Connecting the sensor to the transmitter
CAUTION: In order to avoid damage, make sure the sensor and the cable are level
when attaching.
1 Hold the sensor base while connecting the
cable. Do not squeeze clips. You should hear a
click when the cable and sensor connect. You
will also hear a short beep from the
transmitter.
2 A prepping agent, such as an I.V. Prep may
be used to strengthen adhesion before
applying sterile dressing. Make sure smooth
side is down. The cable may be looped
under tape for strain relief. Apply a sterile,
transparent dressing such as an IV3000®
tape, over site.