User Manual

8 Chapter 2
Programming the sensor
To set up the sensor feature, from the Home screen, press ACT, and do the following steps:
NOTE - The sensor features are programmed in the order described in this chapter.
Main Menu > Sensor> Sensor Setup > Edit Settings
High glucose alarm
Your pump will alarm if your BG reaches or goes above what you set here. If you do not turn on the
High Glucose Alarm your pump will not alarm when your BG goes high.
1 Press ACT . 2 Select On and press ACT. 3 The EDIT SETTINGS screen
will appear. Press ACT to
program your High Glucose
limit.
4 Select On and press ACT . 5 In the SET HIGH GLUCOSE screen, use the up
and down arrow buttons to set your limit.
Press ACT.
EDIT SETTINGS
Sensor: Off
ACT
SENSOR ON/OFF
Off
On
ACT
EDIT SETTINGS
Sensor: On
High Glucose: Off
Low Glucose: Off
ACT
HIGH GLUCOSE
Off
On
ACT
On
(flashing) set, then
press ACT.
SET HIGH GLUCOSE
200mg/dL
ACT