User Manual

Programming your sensor 7
Chapter 2
Programming your sensor
Introduction
This chapter describes how to program your pump to get it ready to accept sensor data. To
understand how to navigate through these screens refer to your Pump User Guide. For your reference
the sensor icons are described below.
Sensor icons
Using your pump - refer to the Pump User Guide (Paradigm 522/722 Infusion Pump User Guide) to
learn how to navigate through the pump screens.There are various icons that appear at the top of
your pump screen, like the time, battery and reservoir icons which are described in your pump user
guide. The icons described here appear if you are using the sensor. Alert and Alarm icons have the
same meaning as described in your pump user guide.
The sensor icon appears once the Sensor feature is turned on.
The sensor icon changes when the sensor is connected to the transmitter and communicating
with the pump.