User Manual

56 Chapter 3

BG Due

One useful feature of the Guardian RT is the BG DUE screen. This screen lets you know when to enter the

next needed blood glucose (BG) value into the Guardian RT to go on with calibration.

From the HOME screen:

1. Press the Up arrow button once. If an initial Sensor calibration has already been performed, the

screen will display when the next BG entry is due. Pressing SEL or ACT once, or the Up arrow 2

times, will return you to the HOME screen. In the example below, the last calibration was done at

12:45 A.M. Therefore, the next BG value is due before 12:45 P.M. because the last BG entered was

12 hours before.

Depending on the condition and calibration status of the Sensor, there are four other screens that may be

displayed, instead of BG DUE, by pressing the Up arrow once from the HOME screen. These screens are:

ENTER BG, PENDING, NO SYNC, and REPLACE.

NOTE -

If calibration is pending, do not turn off the Monitor. Otherwise, you will have to enter a new

Meter BG value.

BG DUE

12:45