User Manual

34 Chapter 2
6. If ON is activated, the default value will be blinking.
7. Use the Up or Down arrow button to choose the value you want to set a high glucose alert.
8. Press the ACT button to save the chosen value. The following screen will appear with CONFIRM
blinking. The value 240 mg/dl (13.3 mmol/l) has been entered in this example.
NOTE - Since it takes time for the Guardian RT to collect and measure glucose values, there is a
delay in triggering the alert. Ask your doctor which glucose limit is right for you.
9. Press the ACT button to confirm the chosen value. The screen will go to the ALERT sub-screen. Press
SEL 7 times to go to EXIT. Press ACT once to go back to the HOME screen.
10. If you do not want to use this feature, repeat steps 1-4, and then use the Up or Down arrow button
to select OFF and press the ACT button. A CONFIRM screen will be displayed. Press the ACT button
once more to set, and the high glucose alert feature will be turned off.
HIGH
LIMITGLUCOSE
SET
mg/dl
200
CONFIRM
240
mg/dl