User Manual

26 Chapter 2

Setting the Current Day

1. The word DAY will now appear with the number “01” blinking

in the upper right-hand corner of the screen.

2. Use the Up or Down arrow button to choose the digits for the

current day of the month, from 1 to 31.

3. Press the ACT button once to save date and time values

chosen.

4. The current time and date will appear briefly, and the

Monitor will go to the DISPLAY sub-screen. Press SEL 5 times to go to EXIT. Press ACT once to return

to the HOME screen.

Clearing the Glucose History

NOTE -

If there is data in the Monitor that you want to save, download the data using the Com-

Station and Guardian Solutions Software before clearing the history.

NOTE -

You only need to clear the Monitor glucose history prior to first-time use, between different

users, or at the end of any training or demo sessions prior to first-time use. Glucose history data

in the Monitor overwrites itself automatically, so you do not need to clear the history on a regular

basis.

The Monitor glucose history should be cleared before first-time use. This is to make sure that the

memory is free of unwanted information.

From the HOME screen:

1. Press the SEL button 7 times until the SETUP screen appears.

2. Press the ACT button once to get to the SETUP sub-screens.

12:00

SET

DAY